Ключевые слова: HTS, REBCO, coated conductors, critical caracteristics, critical current density, angular dependence, pinning, high field tests, mechanical properties, strain effects, upper critical fields, critical current, temperature dependence, magnetic field dependence, n-value, pinning force, numerical analysis, irreversibility fields, experimental results, comparison, LTS
Osamura K., Nishijima G., Zhang Y., Chiesa L., Zhao Y., Shin H.S., Nijhuis A., Weiss K., Walsh R.P., Zhao Z., McRae D.M., Bagrets N., Anvar V.A., Delgado M.A.
Iijima Y., Osamura K., Zhang Y., Fujita S., Harjo S., Hampshire D.P., Machiya S., Kawasaki T., Kajiwara K.
Iijima Y., Osamura K., Breschi M., Chaud X., Nishijima G., Zhang Y., Koizumi T., Nagaishi T., Fukushima T., Shin H.*10, Kiss T.*11
Ключевые слова: HTS, YBCO, GdBCO, coated conductors, Bi2223, tapes, mechanical properties, tensile tests, stress effects, strain effects, critical caracteristics, critical current, loads, cycling, test results
Ключевые слова: standards, LTS, Nb3Al, Nb3Sn, NbTi, HTS, Bi2223, Bi2212, wires monofilamentary, MgB2, critical temperature, critical caracteristics, critical current, ac losses, RRR parameter, mechanical properties, tensile tests
Osamura K., Kobayashi S., Yamazaki K., Fujikami J., Kikuchi M., Takeda S., Nakashima T., Osabe G., Kagiyama T.
Ключевые слова: HTS, DI-Bi2223, coils pancake, impregnation, mechanical properties, strain effects, distribution, synchrotron, X-ray diffraction
Ключевые слова: measurement technique, test results, standards, LTS, NbTi, Nb3Sn, wires, HTS, Bi2223, Bi2212, critical current, critical temperature, upper critical fields, irreversibility fields, critical current, n-value, stability, ac losses, mechanical properties, strain effects, uniformity, REBCO, MgB2
Ключевые слова: presentation, HTS, coated conductors, mechanical properties, measurement technique, standards, width, thickness dependence, laminations, brass laminate, comparison, tensile tests, strain effects, stress effects, transverse stress, measurement setup, critical caracteristics, critical current
Osamura K., Yamada Y., Yamazaki K., Fujikami J., Hampshire D.P., Machiya S., Tsuchiya Y., Osabe G., Shobu T., Kajiwara K.
Ключевые слова: HTS, REBCO, coated conductors, comparison, mechanical properties, strain effects, stress effects, elastic behavior, experimental results
Ключевые слова: LTS, ITER, central coils, Nb3Sn, mechanical properties, strain effects, neutron diffraction, measurement technique, experimental results
Osamura K., Nishimura A., Suzuki H., Ochiai S., Sato M., Miyashita K., Harjo S., Machiya S., Wadayama Y., Tsuchiya Y., Shobu T.
Ключевые слова: LTS, Nb3Sn, Nb3Al, strands, filaments, thermal strain, mechanical properties, stress effects, strain effects
Ключевые слова: HTS, REBCO, YBCO, coated conductors, mechanical properties, twin boundaries, microstructure, synchrotron, stress distribution, strain effects, experimental results
Osamura K., Awaji S., Sugano M., Watanabe K., Sato M., Oguro H., Machiya S., Koganezawa T., Shobu T.
Ключевые слова: LTS, wires, strain effects, mechanical properties, synchrotron, measurement setup, stress effects, experimental results
Osamura K., Nishijima G., Awaji S., Sugano M., Watanabe K., Izumi T., Shiohara Y., Sato M., Ibi A., Yoshizumi M., Oguro H., Suzuki T., Machiya S., Minegishi K., Koganezawa T., Shobu T.
Amemiya N., Osamura K., Nakamura T., Ohashi Y., Ito Y., Yoshikawa M., Okumura N., Terazawa T., Sekiguchi D., Misawa S., Kitano H., Matsuo T.
Ключевые слова: HTS, YBCO, bulk, mechanical properties, strain effects, distribution, measurement technique, neutron diffraction, experimental results
Osamura K., Hojo M., Sugano M., Wada H., Itoh K., Kitaguchi H., Kumakura H., Ochiai S., Kuroda T., Okuda H.
Ключевые слова: HTS, Bi2223, tapes, n-value, critical caracteristics, critical current, mechanical properties, bending process, experimental results, damage mechanisms
Osamura K., Takahashi K., Awaji S., Watanabe K., Suzuki H., Oguro H., Harjo S., Machiya S., Aizawa K.
Osamura K., Hojo M., Nyilas A., Sugano M., Katagiri K., Ochiai S., Shin H.-S., Weiss K.-P., Ohsawa K.
Ключевые слова: HTS, Bi2223/Ag, tapes, mechanical properties, stress effects, strain effects, elastic behavior, tensile tests, fracture behavior, experimental results
Amemiya N., Osamura K., Nakamura T., Itoh Y., Yamada Y., Nagao K., Nishimura T., Matsumura K., Terazawa T.
Ключевые слова: motors synchronous, HTS, rotating machines, torque, Bi2223/Ag, design parameters, design, test results
Ключевые слова: Ac/Dc converters, HTS, YBCO, films, substrate sapphire, experimental results
Osamura K., Koizumi N., Nunoya Y., Matsui K., Nakajima H., Ito T., Takahashi Y., Suzuki H., Hemmi T., Oguro H., Harjo S., Machiya S., Tsuchiya Y., Aizawa K.
Osamura K., Hojo M., Sugano M., Wada H., Itoh K., Kitaguchi H., Kumakura H., Ochiai S., Kuroda T., Okuda H.
Osamura K., Takahashi K., Nishijima G., Awaji S., Watanabe K., Suzuki H., Oguro H., Machiya S., Tsuchiya Y.
Osamura K., Hojo M., Sugano M., Wada H., Itoh K., Kitaguchi H., Kumakura H., Ochiai S., Kuroda T., Okuda H.
Ключевые слова: HTS, Bi2223, tapes, mechanical properties, bending process, critical caracteristics, critical current distribution, modeling, numerical analysis
Ключевые слова: HTS, Bi2223/Ag, tapes, mechanical properties, tensile tests, measurement technique, stress effects, strain effects
Ключевые слова: HTS, YBCO, mechanical properties, strain effects, coated conductors, measurement technique, synchrotron
Iijima Y., Osamura K., Sugano M., Nagaya S., Saitoh T., Shiohara Y., Aoki Y., Hasegawa T., Kato T., Yamada Y., Nakao K., Ibi A., Nakashima N.
Osamura K., Hojo M., Nyilas A., Sugano M., Akita S., Matsushita T., Wada H., Larbalestier D., Ochiai S., Machiya S., Prusseit W.*10*, Otto A.*11*Hampshire D.*12
Ключевые слова: HTS, Bi2223, tapes, YBCO, coated conductors, review, critical caracteristics, critical current, critical current density, neutron diffraction, Jc/B curves, voltage, fluctuations, magnetic field dependence, mechanical properties, elastic behavior, stress effects, strain effects, tensile tests, measurement technique
Osamura K., Hojo M., Mimura M., Ochiai S., Sato M., Okuda H., Shin J.K., Iwamoto S., Mukai Y., Matsubayashi H.
Osamura K., Otto A., Malozemoff A., Ochiai S., Okuda H., Shin J.K., Mukai Y., Matsubayashi H., Arai T.
Osamura K., Hojo M., Seeber B., Nyilas A., Ilyin Y., Katagiri K., Clickner C., Shin H., Nijhuis A., Ekin J., Thoener M., Fluekiger R., Walsh R.P., Toplosky V., Ochiai S.*10, Kubo Y.*11
Ключевые слова: LTS, Nb3Sn, wires, mechanical properties, cables, comparison, review, power equipment
Ayai N., Hayashi K., Osamura K., Kato T., Sato K., Kitaguchi H., Kumakura H., Kobayashi S., Yamazaki K., Fujikami J., Kikuchi M., Shimoyama J., Ishida T., Hata R., YAMADE S., Tatamidani K.
Ключевые слова: Bi2223/Ag, composites, laminations, mechanical properties, strain effects, heat treatment, numerical analysis, experimental results
Ключевые слова: HTS, Bi2223/Ag, tapes, measurement technique, ac losses, magnetic field dependence, critical caracteristics
Ayai N., Hayashi K., Osamura K., Fukumoto Y., Sato K., Kitaguchi H., Kumakura H., Kobayashi S., Yamazaki K., Fujikami J., Kikuchi M., Shimoyama J., Ishida T., YAMADE S., Tatamidani K., Kamijyo H.
Ключевые слова: HTS, DI-Bi2223, overpressure processing, sintering, review, current distribution, homogeneity, long conductors, Jc/B curves, mechanical properties, strain effects, tensile tests, bending process, stress effects, reinforcement, ac losses, experimental results, critical caracteristics, fabrication
Osamura K., Hojo M., Sugano M., Wada H., Itoh K., Ochiai S., Kuroda T., Okuda H., Shin J.K., Mukai Y., Matsubayashi H.
Ключевые слова: HTS, Bi2223, tapes, composites, bending process, critical current, modeling, numerical analysis, critical caracteristics
Ayai N., Hayashi K., Osamura K., Kato T., Sato K., Kitaguchi H., Kumakura H., Kobayashi S., Yamazaki K., Fujikami J., Kikuchi M., Shimoyama J., Ishida T., Hata R., YAMADE S., Iihara J., Yamaguchi K.
Osamura K., Hojo M., Harley E., Otto A., Malozemoff A., Morishita K., Sato M., Okuda H., Ochiai S.(ochiai@iic.kyoto-u.ac.jp), Rokkaku H., Shin J.K., Iwamoto S.
Ключевые слова: HTS, Bi2223/Ag, composites, tapes multifilamentary, mechanical properties, strain effects, thermal stress, tensile tests, experimental results
Osamura K., Ogawa K.(robogawa@gj9.so-net.ne.jp)
Ключевые слова: HTS, Bi2212/Ag, tapes, modeling, current distribution, numerical analysis
Osamura K., Hojo M., Sugano M., Matsuoka T., Okuda H., Ochiai S.(ochiai@iic.kyoto-u.ac.jp), Shin J.K.
Ключевые слова: HTS, REBCO, coated conductors, substrate Hastelloy, mechanical properties, heat treatment, IBAD process, ISD process, YBCO, fabrication, strain effects, experimental results
Ключевые слова: HTS, Bi2223/Ag, tapes, composites, mechanical properties, bending process, critical current, modeling, numerical analysis, critical caracteristics
Ключевые слова: HTS, Bi2223, tapes, filaments, mechanical properties, stress effects, strain effects, fracture behavior, experimental results
Osamura K., Adam M.I.(malik_adam@petronas.com.my)
Ключевые слова: HTS, Bi2223/Ag, tapes, mechanical properties, tensile tests, numerical analysis, experimental results, electromechanical analysis
Osamura K., Nakao F.(fumi.nakao@materials.mbox.media.kyoto-u.ac.jp)
Ключевые слова: HTS, Bi2223, phase formation, measurement technique, synchrotron
Yoshida Y., Osamura K., Matsumoto K., Horii S., Mukaida M., Ichinose A., Horide T.(tomoya.horide@t04.mbox.media.kyota-u.ac.jp)
Ключевые слова: HTS, YBCO, films, Jc/B curves, anisotropy, pinning centers, experimental results, critical caracteristics
Yoshida Y., Osamura K., Matsumoto K., Horii S., Mukaida M., Ichinose A., Takahara D.(takahara@hightc.mtl.kyoto-u.ac.jp), Horide T.(horide@hightc.mtl.kyoto-u.ac.jp)
Osamura K., Sugano M., Adam M.I.(mdries@hotmail.com), Ishimoto M.
Ключевые слова: HTS, Bi2223/Ag, Bi2223/Ag alloy, Bi2223/Ag alloy, mechanical properties, tensile tests, strain effects, stress effects, composites, experimental results
Osamura K., Sugano M., Ochiai S., Nakamura M., Tanaka M., Adachi T., Hojo M.(hojo_cm@mech.kyoto-u.ac.jp)
Osamura K., Nakamura T., Okada M., Higashikawa K.(kohei@asl.kuee.kyoto-u.ac.jp), Takahashi M.
Osamura K., Hojo M., Sugano M., Oh S.S., Ha D.W., Morishita K., Ochiai S., Tanaka M., Ishida T., Doko D., Okuda H.
Ключевые слова: HTS, Bi2223, tapes multifilamentary, tensile tests, fracture behavior, numerical analysis
Osamura K., Nakao-Kametani F.(fumi.nakao@materials.mbox.media.kyoto-u.ac.jp)
Ключевые слова: HTS, Bi2223/Ag, tapes, phase formation, heat treatment, microstructure, fabrication, critical current density, critical caracteristics
Osamura K., Semerad R., Itoh K., Prusseit W., Kiyoshi T., Sugano M.(sugano@kuee.kyoto-u.ac.jp)
Ключевые слова: HTS, YBCO, REBCO, REBCO, coated conductors, substrate Hastelloy, tensile tests, fracture behavior, ISD process, buffer layers, mechanical properties, critical current, strain effects, stress effects, microstructure, quench properties, fabrication, experimental results, critical caracteristics
Osamura K., Sugano M., Ochiai S., Nakamura M., Tanaka M., Adachi T., Hojo M.(hojo_cm@mech.kyoto-u.ac.jp)
Osamura K.(kozo.osamura@materials.mbox.media.kyoto-u.ac.jp), Wada N., Ogawa T., Nakao F.
Ключевые слова: HTS, tapes multifilamentary, barriers, ac losses, fabrication
Ключевые слова: HTS, YBCO, coated conductors, mechanical strain, mechanical properties, substrate CeO2/IBAD-YSZ/Ni alloy, ISD process, buffer layers, REBCO, co-evaporation process, protection layer Au, critical current, bending process, stress effects, microstructure, experimental results, critical caracteristics, fabrication
Ключевые слова: HTS, Bi2223/Ag, tapes, current-voltage characteristics, modeling, numerical analysis, critical caracteristics
Osamura K., Nakamura T., Higashikawa K., BALAMURUGAN S.(SARKARAINADAR.Balamurugan@nims.go.jp)
Osamura K., Sugano M.(sugano@hightc.mtl.kyoto-u.ac.jp)
Osamura K., Nakamura T., Muta I., Hoshino T., BALAMURUGAN S.(SARKARAINADAR.Balamurugan@nims.go.jp)
Osamura K., Muta I., Hoshino T., Nakamura T.(tk_naka@kuee.kyoto-u.ac.jp), Balamurugan S.
Ключевые слова: MgB2/Fe, wires, PIT process, resistivity, temperature dependence, microstructure, critical current density, critical caracteristics, fabrication
Yoshida Y., Osamura K., Matsumoto K.(matsu@hightc.mtl.kyoto-u.ac.jp), Horii S., Horide T., Mukaida M., Ichinose A.
Yoshida Y., Osamura K., Matsumoto K.(matsu@hightc.mtl.kyoto-u.ac.jp), Horii S., Horide T., Mukaida M., Ichinose A.
Ключевые слова: HTS, YBCO, films, substrate single crystal, pinning, Jc/B curves, anisotropy, fabrication, experimental results, critical caracteristics
Osamura K., Ogawa K.(robo@hightc.mtl.kyoto-u.ac.jp)
Osamura K., Nyilas A., Sugano M.(sugano.michinaka@nims.go.jp)
Ключевые слова: HTS, Bi2223/Ag, composites, tapes multifilamentary, mechanical properties, stress effects, strain effects, tensile tests
Sugano M.(sugano@hightc.mtl.kyoto-u-ac.jp), Osamura K., Hojo M.
Ключевые слова: HTS, Bi2223, tapes monofilamentary, mechanical properties, strain effects, experimental results, magnetic properties
Osamura K., Matsumoto K.(matsu@hightc.mtl.kyoto-u.ac.jp), Takechi A., Ono T., Hirabayashi I.
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, buffer layers, PLD process, microstructure, experimental results, fabrication, magnetic properties
Osamura K., Ono T., Hirabayashi I., Matsumoto K., Takechi A.(takechi@kumax.kyoto-u.ac.jp)
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni, SOE process, cap layers, PLD process, microstructure, critical current density, fabrication, critical caracteristics
Osamura K., Matsumoto K., Takechi A.(takechi@sd6.so-net.ne.jp)
Ключевые слова: HTS, YBCO, coated conductors, MOD process, buffer layers, substrate SrTiO3, PLD process, critical current density, fabrication, critical caracteristics
Osamura K., Matsumoto K., Sugano M.(msugano@kumax.mtl.kyoto-u.ac.jp)
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.